|
home
|
Exhaust
- Exhaust
system
- Rob Bell's site is
a good start point here,
but don't forget the drop down menu at the top of the page for further
related information.
- Dieter gives
information on the alternative sport type exhausts here.
- Andy Phillips
gives his views on various systems on MG-Rover.org.
- Erik lists a
variety of systems on his web site here.
- more pictures of
various systems on the CSMGF
web site.
- Paul Lathwell from
DotComoff has
these diagrams of the two
original equipment exhausts.
- Catalytic
converter, or CAT
- Extensive
information on the CAT here
from Rob Bell.
- Dieter gives
information on CATs up to MY2001 on his site here.
- DotComoff shows
how to fit a CAT bypass tube
here.
- Andy Phillips
discusses the CAT in
this post in the MG-Rover.org
forum.
- Flexible
section
- Tony Thompson's
little fix for a rattling flexi here.
- More information
from Rob Bell
here.
- Modifications
- De-burring
- blackoctagan
posted this
fantastic thread showing how he
de-burred a stock VVC exhaust system, complete with detailed photos
- Why
does only one exhaust pipe work on my TF?
- because there is a
valve, the EVC ( Exhaust Volume Control ) valve, fitted to the off side
pipe. It was fitted to reduce noise at low revs. It was disconnected by
many dealers on new TF's as part of the PDI. It can be disconnected in
two ways.
- easy way -
find the valve just behind the tail pipe, you will see a pipe coming
from it, pull it off, plug the end (I used a self tapping screw), and
tie wrap it out of the way. With the pipe disconnected the valve is
open.
- the not so
easy way - I'll let Rob Bell explain the procedure here.
- Exhaust
sound clips
- Where
can I buy a Daytona exhaust from?, or a Miltek, Bastuck, Janspeed.....
- A Daytona can be
purchased from Mike Satur, this
page for a TF and
this page for the F.
- A Miltek can be
purchased from Brown
&
Gammons.
- An Xpower can be
purchased from
any Xpart outlet, or from the
MG-Rover.org on-line shop, don't
forget the 10% discount if your a supporter, or if your after the
Janspeed version, from PTP's
on-line shop. Bear in mind that
there are three variations of the 'XPower' exhaust, but I believe only
two types are available.
- A Scorpion can be
purchased from the MGF
Centre.
- A
Pipedream/Blueflame can be purchased from Abingdon
MG Parts Ltd, click
here for the F, and click
here for the TF system.
- A Bastuck can be
purchased from XTec-Tuning.de,
I hope your German is good!!.
- A Supersports
exhaust can be purchased from
MGOC Accessories. These exhausts
are made by Tiger
Exhausts.
- A DTM style
exhaust can be purchased from
Moss Europe Ltd.
- A Phoenix system
can be purchased direct from Phoenix
Performance Exhausts Ltd, or
from TR Bitz,
don't let the TR's fool you!!. Its also possible that Techspeed
can supply them as well.
- Another option is
a Peco system,
these are made to order with a choice of tail pipes.
|
